Page 1 of 1

turboracing tx/rx

Posted: Fri 17. Mar 2023 12:51
by kiklo
Testing these :

Pro : slimmer RX, Cheap TX, Slightly smaller TX, better for smaller hands. Very afforable.

Con: TX no rechargeble batteries ( going to modify ), RX working Voltage 4-8 V. Still to find out how low V they can be used at.

https://vi.aliexpress.com/item/10050030 ... pt=glo2vnm
IMG_20230317_134315.jpg
IMG_20230317_134315.jpg (116.55 KiB) Viewed 10303 times
Also got a detachable handle, easy to modify to make place for rechargble batteries.

Re: turboracing tx/rx

Posted: Sat 18. Mar 2023 17:33
by NFBrown
Those look perfect for magracing. The price sure is right. How big is the receiver? I couldn't tell on the Aliexpress site.
Nick

Re: turboracing tx/rx

Posted: Sun 19. Mar 2023 15:40
by kiklo
http://www.turboracinghobby.com/goods_show.aspx?id=133

I will measure without cover later.

Re: turboracing tx/rx

Posted: Sun 19. Mar 2023 18:34
by kiklo
It is LWH 30.5 x 15 x 12 (connection pins) without housing

Re: turboracing tx/rx Low volt limit.

Posted: Mon 20. Mar 2023 09:01
by kiklo
I kept my car running on a steady pace. The receiver was usable until voltage droped to V 3.85.
I certainly think that is a yes for our use.

Re: turboracing tx/rx

Posted: Mon 20. Mar 2023 22:12
by NFBrown
Thanks for measuring the receiver, Kim. That's the same size as the Fly Sky. Should be good to go in 1/32nd chassis.

That minimum voltage is high enough that unprotected batteries can be used without concern,

Nick

Re: turboracing tx/rx

Posted: Tue 21. Mar 2023 10:37
by kiklo
OK, My Flysky's are a bit bigger : 32 x 20 x 12. so for me the turboracing rx are easier to fit.

Re: turboracing tx/rx

Posted: Tue 21. Mar 2023 10:39
by kiklo
IMG_20230321_113556.jpg
IMG_20230321_113556.jpg (111.7 KiB) Viewed 10234 times