MAGracing Forum

Hi Kim,
What electronics do you recommend for the KK-CH01-24 and what sources?
Transmitter
Receiver
ESC
Servo - I am particularly interested in getting the best fitting servo

Thanks again,
David Palmeter

For me I resort to Aliexpress or Bangood for electronics. Supplies i Norway are not very abundant.

The most important is to get the right ( smaal enough) servo for the steering. I have made the std CH01 pressfit the ultra small servores like :
Varius shops have them with ovn branding. Look for the dimmentions.

https://www.aliexpress.com/item/1005001 ... xJZYDU6gZr

NB ! Be sure to choose the right connector for your receiver. And be sure they are for singel cell operations ec. 3.6V-4.2V operation. 1S.

For Radio I have used the least expencive FLYSKY radioes. Like ( I have not shopped from this shop )

https://www.aliexpress.com/item/5969438 ... CuP1qQ7G5W

The important thing to know with FLYSHY they use several protocols - so be sure you standarize on one and get sernder and receivers that match.

Or if you go for other brands like FrSky etc.

Several independent developer make receiver board even with integrated ESC to various protocols. So look around.

The size of the receiver/ESC is really not a problem with 1:24 scale models.

There are other posts in this section as well to look at:

https://www.magracingforum.com/viewtopic.php?t=731

Hello and thank you for the links, there is a lot of interesting stuff in stock.

For ESC there are several on the marked. You need bidirecional - brake is really not needed. 1-1.5Ah max current is fine. 3.5-6 V range is fine.

Here is one I'm going to test.
https://www.aliexpress.com/item/1005002 ... EkmyuFvTel

I think you can get it even cheeper some places.


By the spec this should be good. https://www.ebay.com/itm/175256021850?h ... BMuIXdkJRh

The ones I ordered 2-4 years ago may not be available now.