Page 1 of 1
KK-P1 almost ready for race.
Posted: Thu 21. Jan 2021 09:09
by kiklo
- IMG_20210121_095133.jpg (144.28 KiB) Viewed 5483 times
Then I have a race-able couple.
To get the JST-1.25 plug to fit I have to grind off some of the corner of the servo board plug to clear some component.
The power plug only have one hole in the board for the plug, the 2nd has to be bent 90 degrees and soldered on top - not ideal but works - AND wires need to be reversed as the plug will not fit the board the 'right' way.
Power to the motor plug is the easy one, fits between the other two.
The white wheels are my printed ones.
Re: KK-P1 almost ready for race.
Posted: Thu 28. Jan 2021 22:13
by kiklo
Sorry a bit to much horisontal play in the guide. Needs fixing.
Re: KK-P1 almost ready for race.
Posted: Mon 8. Feb 2021 02:29
by davidwp
Looks great! How does the steering servo override of the magnet steer work?
Re: KK-P1 almost ready for race.
Posted: Mon 8. Feb 2021 08:18
by kiklo
The 2 'bar' magnets have there polarity apposed to the center one so they are repelling each other.
That centers the steering but with play to go, so the steering magnet following the rail can still steer.
Then there is the option to 'brute force' steer when the steering pivot arm's long throw hit one of the 2 'bar'.
Then you can over steer the rail even when there are no rail-gap.