KK-CH01-24 Electronics

Questions, Tips and Tricks about the transmitter, the electronics in the car etc.
Post Reply
User avatar
davidwp
Posts: 33
Joined: Fri 28. Dec 2012 03:38
Contact:

KK-CH01-24 Electronics

Post by davidwp »

Hi Kim,
What electronics do you recommend for the KK-CH01-24 and what sources?
Transmitter
Receiver
ESC
Servo - I am particularly interested in getting the best fitting servo

Thanks again,
David Palmeter
kiklo
Administrator
Posts: 485
Joined: Mon 9. Nov 2015 11:49
Location: Norway
Contact:

Re: KK-CH01-24 Electronics

Post by kiklo »

For me I resort to Aliexpress or Bangood for electronics. Supplies i Norway are not very abundant.

The most important is to get the right ( smaal enough) servo for the steering. I have made the std CH01 pressfit the ultra small servores like :
Varius shops have them with ovn branding. Look for the dimmentions.

https://www.aliexpress.com/item/1005001 ... xJZYDU6gZr

NB ! Be sure to choose the right connector for your receiver. And be sure they are for singel cell operations ec. 3.6V-4.2V operation. 1S.

For Radio I have used the least expencive FLYSKY radioes. Like ( I have not shopped from this shop )

https://www.aliexpress.com/item/5969438 ... CuP1qQ7G5W

The important thing to know with FLYSHY they use several protocols - so be sure you standarize on one and get sernder and receivers that match.

Or if you go for other brands like FrSky etc.

Several independent developer make receiver board even with integrated ESC to various protocols. So look around.

The size of the receiver/ESC is really not a problem with 1:24 scale models.

There are other posts in this section as well to look at:

https://www.magracingforum.com/viewtopic.php?t=731
Racing Regards

Kim K.
Loyd63
Posts: 1
Joined: Tue 22. Nov 2022 07:39

Re: KK-CH01-24 Electronics

Post by Loyd63 »

Hello and thank you for the links, there is a lot of interesting stuff in stock.
See my website on this page
kiklo
Administrator
Posts: 485
Joined: Mon 9. Nov 2015 11:49
Location: Norway
Contact:

Re: KK-CH01-24 Electronics

Post by kiklo »

For ESC there are several on the marked. You need bidirecional - brake is really not needed. 1-1.5Ah max current is fine. 3.5-6 V range is fine.

Here is one I'm going to test.
https://www.aliexpress.com/item/1005002 ... EkmyuFvTel

I think you can get it even cheeper some places.


By the spec this should be good. https://www.ebay.com/itm/175256021850?h ... BMuIXdkJRh

The ones I ordered 2-4 years ago may not be available now.
Racing Regards

Kim K.
Post Reply