Controller steering axel fix.

Share your 3d files and help each other with spare parts/upgrades
Post Reply
kiklo
Administrator
Posts: 485
Joined: Mon 9. Nov 2015 11:49
Location: Norway
Contact:

Controller steering axel fix.

Post by kiklo »

To fix my broken steering.
I drilled out the center to 6 mm.
Created a 'bolt', spacer and nut. 3 STL files.
Using a friends 3D printer. Had to sand parts to a snug fit.
Modified the controller with the extra retainer hole to get the spacer to stay put.
(Used drilled the small hole as a guide before I did the 5 mm.)
Added some pictures. May have to ceate a new post to be able to add the STL.
Attachments
parts.JPG
parts.JPG (82.29 KiB) Viewed 21755 times
inside.JPG
inside.JPG (77.75 KiB) Viewed 21755 times
Racing Regards

Kim K.
kiklo
Administrator
Posts: 485
Joined: Mon 9. Nov 2015 11:49
Location: Norway
Contact:

Re: Controller steering axel fix.

Post by kiklo »

Here the STL's are. Have fun.
Attachments
magracing_controller_steering_support_spacer.stl
(26.15 KiB) Downloaded 1149 times
magracing_controller_steering_axel_retainer.stl
(9.46 KiB) Downloaded 1187 times
magracing_controller_steering_axel.stl
(15.34 KiB) Downloaded 1071 times
Racing Regards

Kim K.
kiklo
Administrator
Posts: 485
Joined: Mon 9. Nov 2015 11:49
Location: Norway
Contact:

Re: Controller steering axel fix V2.

Post by kiklo »

Just thought I'd do an update. The problem is still the same. I think this is better fix.

Making a new attachment for the broken steering wheel and twisting the knob 180 as a snap on. You may have to sand a bit depending on your printer.

Here is a pic of the file you can use. The small version is the better I think a it will not split at layers printed that way.
Mag-steering-knob-repJPG.JPG
Mag-steering-knob-repJPG.JPG (30.87 KiB) Viewed 18708 times
IMG_20200513_185814.jpg
IMG_20200513_185814.jpg (56.02 KiB) Viewed 18708 times
Attachments
Id4u-MagRacing-steering-knob.stl
(169.42 KiB) Downloaded 780 times
Racing Regards

Kim K.
kiklo
Administrator
Posts: 485
Joined: Mon 9. Nov 2015 11:49
Location: Norway
Contact:

Re: Controller steering axel fix. Need some ?

Post by kiklo »

If you don't have access to a 3D printer nearby pm me if you want me to send to you.
It will only cost you postage and 2 $ for material
Racing Regards

Kim K.
Post Reply