kiklo wrote:As we are working with some IO issues on Arduino and RC I have put up a small table to compaire settings and output:
colum 1
magracing car no from web
colum 2
dip settings 0=low pos, 1=high pos.
colum 3
car no readings in hex from the Arduino (human readable - enabled)
No00 0000 0
No01 0001 8
No02 0010 4
No03 0011 C
No04 0100 2
No05 0101 A
No06 0110 6
No07 0111 E
No08 1000 1
No09 0110 6
No10 1010 5
No11 1011 D
No12 1100 3
No13 1101 B
No14 1110 7
No15 1111 F
The correct reading here should be :
No00 0000 0
No01 0001 8
No02 0010 4
No03 0011 C
No04 0100 2
No05 0101 A
No06 0110 6
No07 0111 E
No08 1000 1
No09 1001 9
No10 1010 5
No11 1011 D
No12 1100 3
No13 1101 B
No14 1110 7
No15 1111 F