change of rear axle
change of rear axle
I don't like the plastic wheel on the rear axle, so I deside to change the complete rear axle. I bought my things at "umpfis Slotbox in German. see the pictures.
Sorry for my bad english...
Sorry for my bad english...
- Attachments
-
- IMG_4041.JPG (77.38 KiB) Viewed 19154 times
-
- IMG_4038.JPG (36.76 KiB) Viewed 19154 times
-
- IMG_4037.JPG (37.24 KiB) Viewed 19154 times
Wolfgang
- Joel, LeNoir
- Posts: 107
- Joined: Fri 21. Dec 2012 21:47
- Location: Washougal, WA.
Re: change of rear axle
Looking good. Let us know how much slower the car is... That is if ? You could drill some holes in the chassis to get the weight back down...
Re: change of rear axle
I don't think this will work.
Yes the plastic wheels are not the best, but if you put on spronge tires the grip will improve dramatic, and the the car will draw itself away from the magnetic wire in the track.
but lets see the result with a video from your track after change of tires.
Yes the plastic wheels are not the best, but if you put on spronge tires the grip will improve dramatic, and the the car will draw itself away from the magnetic wire in the track.
but lets see the result with a video from your track after change of tires.
/Keld
Re: change of rear axle
Hi Keld,
it works well, I should make another video . With the plastic wheels it wasn't possible to drive with little more speed. but now it works good. sometimes i loose the wire in the narrow curve, but than I'am realy to fast...
it works well, I should make another video . With the plastic wheels it wasn't possible to drive with little more speed. but now it works good. sometimes i loose the wire in the narrow curve, but than I'am realy to fast...
Wolfgang
- Joel, LeNoir
- Posts: 107
- Joined: Fri 21. Dec 2012 21:47
- Location: Washougal, WA.
Re: change of rear axle
As am I.
Re: change of rear axle
I am new to all of this I was wondering if silicon tire would work?
Re: change of rear axle
A lot of things can be used to increase the traction of the plastic wheels that come with the cars sold by Wes R.bojest1 wrote:I am new to all of this I was wondering if silicon tire would work?
One of the best is Grease Monkey Large Black Disposable Nitrile Gloves.
See http://www.magracingforum.com/viewtopic.php?f=6&t=149 for more info.
-
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
Re: change of rear axle
hello, i took 2,38 axles and hard rubbertyres (hardness 30)with alurims in the original dimensions from slot it. works very well, and with a drop of oil on the bearings from time to time the cars are only whispering. its unbelieveble how much lower the noise is.