Reuse SCX/Scaletrix classic track as a MagRacing track.
Posted: Sun 25. Oct 2020 09:58
I have been thinking on this for a while - is it a fast way to a new track ?
So I ripped of the rails by twisting off the locking tabs with a small screwdriver.
Cut some .7 mm wire and yes this could very well be done.
There are 2 options.
Use a 3.6mm (3dprinted) insert in track groove or use one of the existing seating of the rail and fill the rest with black hot glue ?
Then you need to route the racing-line and lane change sections in the plastic.
This is probably an easy way to a MagRacing track.
Here is a picture of one piece. I still have to do the rest - more to come.
Any comments ?
So I ripped of the rails by twisting off the locking tabs with a small screwdriver.
Cut some .7 mm wire and yes this could very well be done.
There are 2 options.
Use a 3.6mm (3dprinted) insert in track groove or use one of the existing seating of the rail and fill the rest with black hot glue ?
Then you need to route the racing-line and lane change sections in the plastic.
This is probably an easy way to a MagRacing track.
Here is a picture of one piece. I still have to do the rest - more to come.
Any comments ?