MAGracing Forum

You probably know.
But by putting the trigger somewhere in reverse position when inserting the battery you will have a slight power on when releasing it, and a car going at constant speed. No messy tape.

MagRacing Battery puller 5mm magnets

Here the STL's are. Have fun.

To fix my broken steering. I drilled out the center to 6 mm. Created a 'bolt', spacer and nut. 3 STL files. Using a friends 3D printer. Had to sand parts to a snug fit. Modified the controller with the extra retainer hole to get the spacer to stay put. (Used drilled the small hole as a guide before ...

Hi. Got some good testing tonight on RC. Setup : I use 3 sensors on 3 Arduino Digital pins (2,3,4). Have coded my cars from 0 to 5 (hex wise, from the table above.). Now running Skjalm cleaned RC.ino code with latest RC we are closer: Procedure: starting with car 0, passing all sensors 1,2,3 3,2,1 I...

As we are working with some IO issues on Arduino and RC I have put up a small table to compaire settings and output: colum 1 magracing car no from web colum 2 dip settings 0=low pos, 1=high pos. colum 3 car no readings in hex from the Arduino (human readable - enabled) No00 0000 0 No01 0001 8 No02 0...

rex craemer wrote:all gt 3 transmitter

Any videos of your crowd racing ?

I guess wood glue do not bind to steel.
But you would not need much contact glue only a drop every 10-15 cm.

The tight cut with the Dremel will do most of the 'hold down' when you squeeze the pianowire down.

The paint on top will do the rest.

This sounds promising. One thing I have in mind is rear axel dim. I have managed to bend the std. 2.mm(dropped off the table), I would consider using 3.mm, and bushings like other 1:32 scale systems. It would also give us a wider choice of supplies. But then you would move away from WES's origin.

Track design, my errors are popping up.
Tracks to narrow to pass when using racing line.