New MagRacing track

Questions and Ideas to track building, how are you doing it? need help? new features? share your ideas.
User avatar
MagRacer
Posts: 65
Joined: Thu 27. Dec 2012 14:59
Location: Denmark
Contact:

Re: New MagRacing track

Post by MagRacer » Tue 25. Feb 2020 20:03

Update.. almost finished with the layout..
web-track.jpg
web-track.jpg (50.73 KiB) Viewed 913 times

User avatar
MagRacer
Posts: 65
Joined: Thu 27. Dec 2012 14:59
Location: Denmark
Contact:

Re: New MagRacing track

Post by MagRacer » Tue 25. Feb 2020 20:20


kiklo
Administrator
Posts: 200
Joined: Mon 9. Nov 2015 11:49
Location: Norway

Re: New MagRacing track

Post by kiklo » Wed 26. Feb 2020 09:42

Looks like a very smooth raceline and a very nice pit-lane.
Just be aware : you will need 6-8 mm spacing between parallel lanes Crossing lanes at very small angels is not easy, and any lane change will have to be at a the end of a 25-30 cm straight
Racing Regards

Kim K.

Ned
Posts: 320
Joined: Sun 13. Apr 2014 01:02
Location: Sedona, AZ USA

Re: New MagRacing track

Post by Ned » Wed 26. Feb 2020 13:13

For 1/32, I recommend a minimum of 6.5cm between straight parallel lanes and a min of 8cm between lanes on the corners. I agree with Kim that you need at least 30cm of straight guide wire leading up to a lane change, so that the car is going perfectly straight when it reaches the lane change. I suspect that the minimum crossing angle is about 30 degress, if you want it to be reliable without any steering input. Where the guide wires cross, create a gap just big enough for the crossing wire to pass between the ends of the other wires. It won't hurt if the ends of the wire touch the sides of the crossing wire.

Post Reply