Page 1 of 1

Lane change tip

Posted: Mon 27. Jan 2014 18:23
by WesR
If one lane change does not work consistently, the problem may be that the l/c plate may be a little too high or the track surface may be low. These will increase the magnetic effect and make the
steering arm reluctant to move over. A piece of masking tape alongside the l/c will raise the car and reduce the magnetic effect so the car is more likely to turn. Tape can be on one side or both sides of the l/c. The tape will paint over very easily.

Re: Lane change tip

Posted: Mon 27. Jan 2014 18:34
by WesR
L/c photo

Re: Lane change tip

Posted: Tue 28. Jan 2014 15:08
by Keld
good tip :thumpup

Re: Lane change tip

Posted: Tue 28. Jan 2014 15:47
by Lasp
Nice WesR.
I have ask you about the pre mm for the lc arrow, its look like 50 mm!
Is that right!

Re: Lane change tip

Posted: Sat 1. Feb 2014 20:28
by WesR
Hi Lasp, Do you mean how far in front of the l/c should the arrow be? Mine vary from 50mm
to 300 but I guess they should all be the same. I think you need arrows for the benefit of
novice drivers.

Re: Lane change tip

Posted: Sat 1. Feb 2014 20:38
by Lasp
Yes!

You are the Master and sets the rules ;-) Schould be simular to all tracks.

I just obey and mark the place.