In a plattform for a another WheelBase?
If the batteri last as long as I now, 1 h is not nececerly to change it from the bottom.
Then it could be a new plattform for the cars like this!
Is it of some ...
The extension pdf is not allowed.
Then yoy can add hole for the rear axel at your place
Is anyone interested
Is anyone interested
- Attachments
-
- chassie.JPG (9.97 KiB) Viewed 13559 times
Re: Is anyone interested
I can see that its possible to make a another chassi.
Smaller for some kaross and with a longer wheelbase.
How long should it bee more?
Then its just too move ower the steering parts, glue the motor and move the electric parts.
Smaller for some kaross and with a longer wheelbase.
How long should it bee more?
Then its just too move ower the steering parts, glue the motor and move the electric parts.
Re: Is anyone interested
Lasp, I would say a chassis with an 83mm wheelbase, or about 7mm longer than stock, would fit many currently available slot car bodies, both LMP and GT3.
Re: Is anyone interested
OK I messaured the chassi to 76 mm so it sounds OK
Trye too make a another chassi with that mm Ewen trye too make it smaller.
Trye too make a another chassi with that mm Ewen trye too make it smaller.
- Joel, LeNoir
- Posts: 107
- Joined: Fri 21. Dec 2012 21:47
- Location: Washougal, WA.
Re: Is anyone interested
What program are you using to draw up the chassis? I am thinking of having my adjustable chassis printed from shapways. Would be easier for myself & if others wanted some as well. This way I would be able to focus more on vacuum forming bodies.....
Would you be able to take the dimensions from my chassis & copy it into the program you are using? I am only about half finished with the chassis I have been working on. So still a few months from being complete. Then need lots of testing before the printing can begin........
Would you be able to take the dimensions from my chassis & copy it into the program you are using? I am only about half finished with the chassis I have been working on. So still a few months from being complete. Then need lots of testing before the printing can begin........
-
- Posts: 41
- Joined: Sat 10. Aug 2013 08:39
Re: Is anyone interested
Please let me know how much shape ways wants to charge you for a chassis, as I hope to have my own RP/3D machine by the end of the year.
One of the first things I will be doing is making a car chassis of some sort, be it RC slot, or something, to test durability of the material the machine I intend to get uses...
The machine I am getting will be high enough resolution and smoothness to do bodies, but they need to be small bodies, or made in separate front/rear halves.
One of the first things I will be doing is making a car chassis of some sort, be it RC slot, or something, to test durability of the material the machine I intend to get uses...
The machine I am getting will be high enough resolution and smoothness to do bodies, but they need to be small bodies, or made in separate front/rear halves.
Re: Is anyone interested
Still a solution for a 0.8 mm Aluminium.
But will also trye kolfiber (Carbonfibre) on something like this! All this because I am not good at painting and decoration.
Want to use ready chassis. Bodys
But will also trye kolfiber (Carbonfibre) on something like this! All this because I am not good at painting and decoration.
Want to use ready chassis. Bodys