Just to find out if it works: 1/24 scratch build chassis

Tips and tricks about building a car. painting it a making it run smooth.
Ned
Posts: 368
Joined: Sun 13. Apr 2014 01:02
Location: Sedona, AZ USA

Re: Just to find out if it works: 1/24 scratch build chassis

Post by Ned »

Thanks for the information Markus.
rex craemer
Posts: 456
Joined: Thu 4. Dec 2014 09:53
Location: cologne

Re: Just to find out if it works: 1/24 scratch build chassis

Post by rex craemer »

hello all, i dont wanted to go on with 1:24, but as i have seen kelds project i have new elan to do it. some specifications, rearwheels are 13mm wide, sanded down from 26,5 to 25 mm with a hudy, frontwheels are o rings with 23mm, wheelbase is 110 mm, rearaxlewide 74 mm, frontaxlewide 71 mm, weight , without akku, is 101 gramms, frontaxle and chassie are original, only worked it over.
rex craemer
Posts: 456
Joined: Thu 4. Dec 2014 09:53
Location: cologne

Re: Just to find out if it works: 1/24 scratch build chassis

Post by rex craemer »

rex craemer
Posts: 456
Joined: Thu 4. Dec 2014 09:53
Location: cologne

Re: Just to find out if it works: 1/24 scratch build chassis

Post by rex craemer »

rex craemer
Posts: 456
Joined: Thu 4. Dec 2014 09:53
Location: cologne

Re: Just to find out if it works: 1/24 scratch build chassis

Post by rex craemer »

f...ck, there was the radio on in the first video, cant see it in germany.hope its avaiable in other countrys. i orderd ballbearings for the frontwheels, hope to get the frontaxle runs straight without shimmy.
User avatar
Keld
Administrator
Posts: 417
Joined: Thu 13. Dec 2012 19:06
Location: Copenhagen, Denmark
Contact:

Re: Just to find out if it works: 1/24 scratch build chassis

Post by Keld »

Great Markus
I can see them here in Denmark
/Keld
rex craemer
Posts: 456
Joined: Thu 4. Dec 2014 09:53
Location: cologne

Re: Just to find out if it works: 1/24 scratch build chassis

Post by rex craemer »

rex craemer
Posts: 456
Joined: Thu 4. Dec 2014 09:53
Location: cologne

Re: Just to find out if it works: 1/24 scratch build chassis

Post by rex craemer »

thanks keld, without backgroundmusik it works.
rex craemer
Posts: 456
Joined: Thu 4. Dec 2014 09:53
Location: cologne

Re: Just to find out if it works: 1/24 scratch build chassis

Post by rex craemer »

i have forgotten something important. i built a new guidearm ot of fatter and harder plastic . the original arm bends to much with the stronger guidemagnet and so the magnet sucks to the wire and the car stops. with a stronger arm it works.
rex craemer
Posts: 456
Joined: Thu 4. Dec 2014 09:53
Location: cologne

Re: Just to find out if it works: 1/24 scratch build chassis

Post by rex craemer »

Image
Post Reply