Hi All, I noticed that some of the slot car wheel inserts fit the MAGracer wheels. These are Slot.It PA34 for the Lancia Group C Car.
I see there are many others but I not sure if they will fit. I only used the center and the brake disk glued to the back of it, then glued both to the wheel. I drilled the center of the front insert out to 1/8 " to clear the front axle, the rears are stock. I should paint he axles black to hide them.
I hope you like,
Paul
Wheel Inserts
-
Double Naught
- Posts: 160
- Joined: Sun 23. Dec 2012 14:37
- Location: Edmonton, Alberta, Canada
Wheel Inserts
- Attachments
-
- DSCN1143.JPG (79.26 KiB) Viewed 9593 times
-
- DSCN1141c.jpg (35.72 KiB) Viewed 9593 times
-
- DSCN1147c.jpg (30.08 KiB) Viewed 9593 times
Re: Wheel Inserts
nice rims, one day somebody should make resin inserts just like we have to our slotcars (mine are 1/24 so they don't fit)
the gold color is not good for a car, give it some clear coat and it will become green
the gold color is not good for a car, give it some clear coat and it will become green
/Keld
-
Double Naught
- Posts: 160
- Joined: Sun 23. Dec 2012 14:37
- Location: Edmonton, Alberta, Canada
Re: Wheel Inserts
Are you making fun of my photography skills Keld?Keld wrote:the gold color is not good for a car, give it some clear coat and it will become green
It's actually silver! I need better lighting 
Paul
Re: Wheel Inserts
No no fun, it's look gold colored, Silver is ok, just put some Martini decals on it.Double Naught wrote:
Are you making fun of my photography skills Keld?
Paul
/Keld
-
Nor Cal Mike
- Posts: 183
- Joined: Fri 21. Dec 2012 22:22
Re: Wheel Inserts
Paul,
That is a BIG improvement.
Mike
That is a BIG improvement.
Mike