Alternative front assembly.

Tips and tricks about building a car. painting it a making it run smooth.
Post Reply
kiklo
Administrator
Posts: 485
Joined: Mon 9. Nov 2015 11:49
Location: Norway
Contact:

Alternative front assembly.

Post by kiklo »

I have made several test on servo based fronts.

One problem is the influence of the motor-magnet on the steering with the servo is paced between the front wheels.

So I'm now going to test linear servo placed vertical.
It can also provide a more direct linkage.

Still a very much WIP.

Here is picture of my ideas. And a link to sourcing the servo. Sorry, that link was horrible. Just search 'linear servo' on aliexpress.

linear-front.JPG
linear-front.JPG (39.44 KiB) Viewed 5068 times
An other benefit is a very short overhang at the front.
Racing Regards

Kim K.
kiklo
Administrator
Posts: 485
Joined: Mon 9. Nov 2015 11:49
Location: Norway
Contact:

Re: Alternative front assembly. A few iteration later

Post by kiklo »

This on is going to be tested.
MAg-linear.JPG
MAg-linear.JPG (30.21 KiB) Viewed 5043 times
Racing Regards

Kim K.
kiklo
Administrator
Posts: 485
Joined: Mon 9. Nov 2015 11:49
Location: Norway
Contact:

Re: Alternative front assembly.

Post by kiklo »

Testing shows I have a too wobbling 'guide'. It bend down at the magnet force.
So testing now is a guide with a recess in the chassis. The guide will slide on top and not be able to dip down and 'bite' the track. It will probably give me a more constant height of the magnet. Hopefully without giving to much extra resistance sideways.

PS don't mind the color. Using leftovers for testing
Attachments
IMG_20200519_094921.jpg
IMG_20200519_094921.jpg (102.21 KiB) Viewed 4999 times
Racing Regards

Kim K.
Post Reply