Just to find out if it works: 1/24 scratch build chassis
Re: Just to find out if it works: 1/24 scratch build chassis
Thanks for the information Markus.
-
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
Re: Just to find out if it works: 1/24 scratch build chassis
hello all, i dont wanted to go on with 1:24, but as i have seen kelds project i have new elan to do it. some specifications, rearwheels are 13mm wide, sanded down from 26,5 to 25 mm with a hudy, frontwheels are o rings with 23mm, wheelbase is 110 mm, rearaxlewide 74 mm, frontaxlewide 71 mm, weight , without akku, is 101 gramms, frontaxle and chassie are original, only worked it over.
-
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
-
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
-
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
Re: Just to find out if it works: 1/24 scratch build chassis
f...ck, there was the radio on in the first video, cant see it in germany.hope its avaiable in other countrys. i orderd ballbearings for the frontwheels, hope to get the frontaxle runs straight without shimmy.
Re: Just to find out if it works: 1/24 scratch build chassis
Great Markus
I can see them here in Denmark
I can see them here in Denmark
/Keld
-
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
-
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
Re: Just to find out if it works: 1/24 scratch build chassis
thanks keld, without backgroundmusik it works.
-
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
Re: Just to find out if it works: 1/24 scratch build chassis
i have forgotten something important. i built a new guidearm ot of fatter and harder plastic . the original arm bends to much with the stronger guidemagnet and so the magnet sucks to the wire and the car stops. with a stronger arm it works.
-
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne