I turned my old unfinished slotcar track upside down and started drawing and Dremeling the Keld way. Kind of.
I had some 100 m 1mm soft wire to be used so I needed to put 2 blades in my Dremel to get a wider groove. Working slowly to avoid overheating. Pictures comming.
Re: Bru, ( ~Stavanger ) Norway
Posted: Fri 4. Dec 2015 09:39
by Keld
we are looking forward to see your project
Re: Bru, ( ~Stavanger ) Norway
Posted: Fri 4. Dec 2015 19:11
by kiklo
A few pictures, sorry for the orientation.
Re: Bru, ( ~Stavanger ) Norway
Posted: Sat 5. Dec 2015 07:50
by rex craemer
very nice, hope all of your lanechanges will work. but the first track is for learning. i changed a lot on my and learned a lot.
Re: Bru, ( ~Stavanger ) Norway
Posted: Sun 10. Jan 2016 13:09
by kiklo
A short video
Re: Bru, ( ~Stavanger ) Norway
Posted: Mon 11. Jan 2016 18:38
by kiklo
Short tesrun from BRW.
Re: Bru, ( ~Stavanger ) Norway
Posted: Mon 11. Jan 2016 20:56
by kiklo
A second one, I do manage to find the raceline sometime.
All my lanechanges seems to work ok.
Re: Bru, ( ~Stavanger ) Norway
Posted: Tue 12. Jan 2016 05:29
by rex craemer
nice, all lc are working? cant read your comment under the video.
Re: Bru, ( ~Stavanger ) Norway
Posted: Tue 12. Jan 2016 11:50
by kiklo
Thx Keld,
Yes they do all work, even those very near corners.
The hard ones to catch are those coming out of a turn with counter-steer, then there are no more 'turn' to steer away from the current line.
So at those places I need to have finished my turn, entering straight on the LC.
It is just take some training.
LC are all without LC-plates, just 20-25 mm wire gap.
