Controller steering axel fix.

Share your 3d files and help each other with spare parts/upgrades
Post Reply
kiklo
Administrator
Posts: 252
Joined: Mon 9. Nov 2015 11:49
Location: Norway

Controller steering axel fix.

Post by kiklo » Thu 11. Feb 2016 19:10

To fix my broken steering.
I drilled out the center to 6 mm.
Created a 'bolt', spacer and nut. 3 STL files.
Using a friends 3D printer. Had to sand parts to a snug fit.
Modified the controller with the extra retainer hole to get the spacer to stay put.
(Used drilled the small hole as a guide before I did the 5 mm.)
Added some pictures. May have to ceate a new post to be able to add the STL.
Attachments
parts.JPG
parts.JPG (82.29 KiB) Viewed 4201 times
inside.JPG
inside.JPG (77.75 KiB) Viewed 4201 times
Racing Regards

Kim K.

kiklo
Administrator
Posts: 252
Joined: Mon 9. Nov 2015 11:49
Location: Norway

Re: Controller steering axel fix.

Post by kiklo » Fri 12. Feb 2016 08:31

Here the STL's are. Have fun.
Attachments
magracing_controller_steering_support_spacer.stl
(26.15 KiB) Downloaded 342 times
magracing_controller_steering_axel_retainer.stl
(9.46 KiB) Downloaded 327 times
magracing_controller_steering_axel.stl
(15.34 KiB) Downloaded 332 times
Racing Regards

Kim K.

kiklo
Administrator
Posts: 252
Joined: Mon 9. Nov 2015 11:49
Location: Norway

Re: Controller steering axel fix V2.

Post by kiklo » Wed 13. May 2020 17:02

Just thought I'd do an update. The problem is still the same. I think this is better fix.

Making a new attachment for the broken steering wheel and twisting the knob 180 as a snap on. You may have to sand a bit depending on your printer.

Here is a pic of the file you can use. The small version is the better I think a it will not split at layers printed that way.
Mag-steering-knob-repJPG.JPG
Mag-steering-knob-repJPG.JPG (30.87 KiB) Viewed 1154 times
IMG_20200513_185814.jpg
IMG_20200513_185814.jpg (56.02 KiB) Viewed 1154 times
Attachments
Id4u-MagRacing-steering-knob.stl
(169.42 KiB) Downloaded 51 times
Racing Regards

Kim K.

kiklo
Administrator
Posts: 252
Joined: Mon 9. Nov 2015 11:49
Location: Norway

Re: Controller steering axel fix. Need some ?

Post by kiklo » Thu 14. May 2020 10:03

If you don't have access to a 3D printer nearby pm me if you want me to send to you.
It will only cost you postage and 2 $ for material
Racing Regards

Kim K.

Post Reply