Page 1 of 1

Chop Shop?

Posted: Sat 2. Mar 2013 12:24
by Erik M
I went through the "Prices" and found some posts I am wondering about:

Track board A4 size, packs of 25 .
Is this cardboard to cut and lay around the piano wire?

M09 Chassis mouldings including front suspension plates, steering plate, stub axle carriers, magnet guide arm and front bumper.
Is there any picture/s of this bundle?
If I understand it correctly this is a chassis with all the steering?
But you also need M16 "Screws , car set (15 assorted screws and nuts)" to assemble it?

M08 Body mount kit, 3 screws, 6 magnets.
M18 Magnets, 3mm diam x 2, pack of 6.
Are the same, sans the screws, right?

Re: Chop Shop?

Posted: Sat 2. Mar 2013 14:07
by Keld
Erik M wrote:I went through the "Prices" and found some posts I am wondering about:

Track board A4 size, packs of 25 .
Is this cardboard to cut and lay around the piano wire?
Yes


M09 Chassis mouldings including front suspension plates, steering plate, stub axle carriers, magnet guide arm and front bumper.
Is there any picture/s of this bundle?
If I understand it correctly this is a chassis with all the steering?
But you also need M16 "Screws , car set (15 assorted screws and nuts)" to assemble it?
And axles, motor, etc etc etc, this is only the plastic part in the chassis, it is spare part if you jump on your car :usch


M08 Body mount kit, 3 screws, 6 magnets.
M18 Magnets, 3mm diam x 2, pack of 6.
Are the same, sans the screws, right? Yes

Re: Chop Shop?

Posted: Sat 2. Mar 2013 17:07
by Erik M
Of course! :tung

The question was if you need the bag o'screws to assemble what comes in M9...

Got any picture of M9 to share?